Máy hàn cáp quang ILSINTECH Swift R5

Mã sản phẩm: #SWIFT-R5

Số lượng: Còn hàng

Tên sản phẩm: Máy hàn cáp quang iLsintech Swift-R5
Mã sản phẩm: iLsintech SWIFT-R5
Hãng sản xuất: iLsintech Swift
Xuất xứ: Korea
Giá : Liên hệ với chúng tối để có giá tốt nhất

HOTLINE:

0934 70 50 10 0969 70 50 10

Liên hệ với Kinh Doanh để được tư vấn và báo giá tốt nhất:

Mr. Lưu 0966 527 292

Mr. Công 0911 725 768

Thêm yêu thích

Mô tả
Đánh giá (0)

Rate this post

Máy hàn cáp quang ILSINTECH Swift-R5

Máy hàn cáp quang Ilsintech Swift-R5, Ribbon Fiber chịu được môi trường khác nghiệt, dễ dàng sử dụng, hạn chế vết trầy xướt, chống bụi, truy cập từ internet từ xa…

Stripping

▶ No scratches from heated stripping

▶ Over one million life cycles of the motor

▶ Over 5kg/f Tensile Strength of fiber after stripping

Cleaning

▶ One-touch pump

▶ Easy to refill cleaning alcohol

Cleaving

▶ Single-action cleaving

▶ Fiber chip collector attached.

Internet remote access maintenance

4.3-inch Color LCD Monitor with Touch Screen

▶ Magnification : 20X

▶ User-friendly and ergonomically designed by navigational touch screen

Resistance to Shock, Dust and Water

▶ The splicer with high reliability has stable performance even in a harsh environment.

l Shock – Free Fall : 76cm from 5 sides l Waterproof : IPx2 l Dustproof : IP5x

Powerful Lithium Polymer Battery with Large Capacity

▶ More than 320 times for full cycling of splicing and sleeving when fully charged

Equipped with Sleeve Loader to Prevent Contamination and to Provide Convenience

▶ Prevents the supplementary sleeve from contamination and falling.

Built-in Dual Sleeve Heater

▶ Productivity would be increased up to 30% due to a simple & user-friendly design.

▶ The dual-heater can work for both Fiber to Fiber and Fiber to Swift Connector.

Thông số kỹ thuật – SPECIFICATIONS

Category	Description
Fiber alignment	Fixed V-Groove(Clad to Clad)
Applicable type of fibers	SM(ITU-T G.652), MM(ITU-T G.651), DS(ITU-T G.653), NZDS(ITU-T G.655)
Fiber count	Single fiber, 2~12 fiber
Applicable fiber dimensions	Single: Cladding diameter 125㎛, Coating diameter 250, 900㎛ Ribbon: Cladding diameter 125㎛, Ribbon fiber thickness 0.27 to 0.32mm
Fiber setting and cleaved length	8mm
Splicing modes	Splice mode: 100, Heat mode: 50
Typical Splice Loss	SM: 0.05dB, MM: 0.02dB, DS: 0.08dB, NZDS: 0.08dB
Return Loss	> 60dB
Splicing Time	Typical 20sec with standard SM(ITU-T G.652)
Splice loss estimate	Available
Sleeve heating time	30sec, 50sec
Applicable protection sleeve	40, 60mm(fiber)
Storage of splice result	The last 10,000 results to be stored in the internal memory. (Image 10,000 results)
Tension test	2N / 4,4N(Option)
Operating condition	Altitude: 5,000m above sea level, Temperature: -10℃~50℃,Humidity: 0~95%, Wind: 15m/s, non-condensing, dust proof, water proof, shock proof
Storage condition	Temperature: -40℃~80℃, Humidity: 0~95%
Dimension	142(W)ｘ225(L)ｘ132(H)mm(Including rubber)
Weight	2.5kg(Including battery 3.2kg)
Viewing method and display	Two CMOS cameras and 4.3-inch color LCD monitor with touch panel
Fiber view and magnification	50X
Power supply	DC Lithium polymer battery(DC 14.8V, 8400mAh), 100~240V AC Adapter
No. of splice cycles with battery	320cycle
Electrode life	More than 1,000 times
Terminals	USB, External power(DC 12V Available for car cigar jack)